English     中文

A10 & A12 Customer Programming Software

Table of Contents

1.        Introduction

2.        What's new in this release

3.        Requirements

4.        Installation, upgrade, removal

5.        Important notes

6.        Legal Notice

1. Introduction

Welcome to the A10 & A12 Customer Programming Software (CPS).

2. What's new in this release

Version	Notes
R01.00	Support for Mag-One radios.
R01.01	Added more default profiles.
R02.00	Added support for customized DPL, Dynamic Talkaround Scan, Channel Disable.

3. Requirements

Operating System	Required Patches
Microsoft® Windows® 2000 Professional
Microsoft® Windows® XP Home/Professional Edition
Microsoft® Windows® Vista Home/Professional Edition
Microsoft® Windows® 7 Professional Edition

 

Microsoft® Internet Explorer	Feature Affecting
Internet Explorer v1.0 or v2.0	The help & report, New features can not work.
Internet Explorer v3.0	The reports may not be formatted correctly.
Internet Explorer v4.0 or v5.0	Only print will be available for reporting, the print preview feature can not be available.
Internet Explorer v5.5 or later	All the features are available. Strongly recommended v5.5 or later version.

 

Hardware Recommendations

·         The application takes approximately 16 MB of free disk space on your PC. However, you may want more space to allow you to save archive files of your radios. Each archive file varies in size depending on the features of the radio that are enabled. A good rule of thumb is 10 KB per archive file.

·         For processor speed and RAM, nothing is required beyond the recommendations given by Microsoft for the release of the operating system that you are using.

·         The graphical user interface is best displayed using 1024*768 and 65536 color display or better (use small font).

·         A CD-ROM drive.

·         A USB port.

4. Installation, Upgrade, Removal

Installation

You need to have Administrator rights on the target PC in order to install the software if you are running Microsoft Windows 2000 Professional, or Microsoft Windows XP Home/Professional Edition.

Proceed as follows for CD-ROM version:

• Insert the CD-ROM containing the installation into the CD-ROM drive.
• If the installation application doesn’t start within 30 seconds, the auto-run feature for CD-ROMs for you operating system is likely disabled. Browse to your CD-ROM and run the autorun.exe program. For example, if the E:\ drive is the CD-ROM, run E:\autorun.exe.
• If a previous version of CPS has already been installed, you will be given the option to “Repair” or “Remove”. If you are upgrading the CPS, then remove the previous version and start the installation process again. If you are re-installing the CPS, then choose the repair option.

 

Proceed as follows for software package version:

• Unzip the CPS package to a directory of a local disk.
• Browse to this directory and run the autorun.exe program.
• If a previous version of CPS has already been installed, you will be given the option to “Repair” or “Remove”. If you are upgrading the CPS, then remove the previous version and start the installation process again. If you are re-installing the CPS, then choose the repair option. 

Upgrade

During the upgrade procedure, dealer information will be reset to their default values. You will need to check these settings after the new version has been installed and make changes as necessary.

To upgrade from a previous version of this software, first remove the previous version (see instructions in section below) and then install this version.
This version can open any archive file created with a previous versions. In addition, it supports all previously released codeplug versions so you will be able to read, write older radios as well.

Removal

From the Start button on the task bar of your operating system, select Settings > Control Panel. Select the Add/Remove Programs option within the control panel. Select the A10 & A12 CPS in the “Currently installed programs” box and click the remove button.

Or from the Start button on the task bar of your operating system, select Programs >Motorola > A10 & A12 CPS > Uninstall A10 & A12 CPS.

5. Important Notes

The following issues are known problems with the R01.00 release of the A10 & A12 CPS.

·         If the display setting’s font size is set to “Custom setting” instead of “Small Fonts” or “Large Fonts” the Toolbar and Report may not display properly.

6. Legal notice

Microsoft® and Windows® are registered trademarks of Microsoft Inc.
Motorola® is registered trademark of Motorola Solutions, Inc.

 

A10&A12用户编程软件

目录

1. 简介
2. 此版本的新增功能
3. 要求
4. 安装，升级，删除
5. 重要说明
6. 法律声明

1. 简介

欢迎使用A10&A12用户编程软件(CPS)。

2. 此版本的新增功能

版本	备注
R01.00	支持 Mag One 对讲机。
R01.01	增加了更多的缺省文件。
R02.00	增加了用户自设DPL，动态脱网扫描和禁用信道的功能。

3. 要求

操作系统	所需的修补程序
Microsoft® Windows® 2000 Professional
Microsoft® Windows® XP Home/Professional Edition
Microsoft® Windows® Vista Home/Professional Edition
Microsoft® Windows® 7 Professional Edition

 

Microsoft® Internet Explorer	功能影响
Internet Explorer v1.0 或 v2.0	帮助&报表， 新功能无法使用.
Internet Explorer v3.0	报表格式不一定正确.
Internet Explorer v4.0 或 v5.0	报表只有打印功能， 打印预览功能将无法使用.
Internet Explorer v5.5 或 更高版本	所有功能可使用. 强烈推荐使用 v5.5 或更高版本.

 

硬件配置建议

·   该应用程序占用计算机上约 16 MB 可用磁盘空间。但您可能需要更多空间来保存对讲机的存档文件和设备更新软件包。具有不同功能的对讲机，其存档文件或设备更新软件包的大小也有所不同。通常一个存档的参考大小是10KB.

·   Microsoft 为当前所用的操作系统版本推荐的处理器速度和 RAM 应该足以满足需求。

·   为获得最佳显示效果，请将计算机的显示设为 1024*768 大小， 65536色彩或更好配置 （请使用小字体）。

·   一个CD-ROM驱动器。

·   一个USB端口。

4. 安装，升级，删除

安装

您必须具有目标计算机的管理员权限才能安装该软件。   对于 CD-ROM 版本，按照下面的步骤操作： ·   将包含安装程序的 CD-ROM 插入 CD-ROM 驱动器。 ·   如果安装应用程序未在 30 秒内启动，则可能禁用了操作系统中的 CD-ROM 自动运行功能。找到 CD-ROM 并运行 autorun.exe 程序。例如，如果驱动器 E:\ 为 CD-ROM，则运行 E:\autorun.exe。 ·   如果已安装了 CPS 的先前版本，可以选择进行“修复”或“删除”。如果要进行 CPS 升级，请删除先前版本并再次进行安装。如果要重新安装 CPS，请选择“修复”选项。   对于软件包版本，按照下面的步骤操作： ·   将 CPS 包解压到本地磁盘的某一目录下。 ·   找到此目录并运行 autorun.exe 程序。 ·   如果已安装了 CPS 的先前版本，可以选择进行“修复”或“删除”。如果要进行 CPS 升级，请删除先前版本并再次进行安装。如果要重新安装 CPS，请选择“修复”选项。

升级

在升级安装过程中，首选项和代理商信息的设置将重置为缺省值。新版本安装完成后，需要检查这些设置并进行必要的更改。   要进行 CPS 升级，请删除先前版本并再次进行安装现行版本。   现行版本可打开先前存档文件。 并且支持所有先前codeplug版本以支持旧的同款对讲机的读取和写入。

删除

单击操作系统任务栏上的“开始”按钮，选择“设置”>“控制面板”。在控制面板中选择“添加/删除程序”选项。在“当前安装的程序”框中选择A10 & A12 CPS项目并单击“删除”按钮。 或者单击操作系统任务栏上的“开始”按钮，选者 “程序”〉Motorola > A10 & A12 CPS > Uninstall A10 & A12 CPS.

5. 重要说明

以下是A10 & A12 CPS R01.00版本已知问题：

·   如果显示字体被设成“用户自定义”而不是“小字体”或者“大字体”的话， 工具栏和报表可能无法正确显示。

6. 法律声明

Microsoft® 和 Windows® 是 Microsoft Inc. 的注册商标。

Motorola® 是 Motorola Solutions, Inc. 的注册商标。